Page 1 of 1
Not good for Boeing
Posted: Tue Mar 26, 2019 3:34 pm
by RealJustme
Southwest Airlines Boeing 737 MAX 8 plane — the same model that has been grounded after two recent crashes — made an emergency landing Tuesday afternoon at Orlando International Airport, a spokeswoman said.
There were no passengers aboard. Two pilots were flying to California when they encountered engine problems about 10 minutes after takeoff, said Rod Johnson, spokesman for the Greater Orlando Aviation Authority.
They turned around and landed safely, Johnson said. It happened around 3 p.m.
According to the online flight-tracking service FlightAware, the plane was going to Victorville, Calif., which is about 85 miles northeast of Los Angeles. It was being flown there for storage, Johnson said.
“The crew of Southwest Airlines Flight 8701, a Boeing 737 MAX aircraft, declared an emergency after the aircraft experienced a reported engine problem while departing from Orlando International Airport in Florida about 2:50 p.m. today,” the statement said. “The aircraft returned and landed safely in Orlando. No passengers were aboard the aircraft, which was being ferried to Victorville, Calif., for storage. The FAA is investigating.”
Re: Not good for Boeing
Posted: Tue Mar 26, 2019 6:59 pm
by elklindo69
So what are you long or short this one?
:lol:
Re: Not good for Boeing
Posted: Tue Mar 26, 2019 10:47 pm
by RealJustme
Elk what are you trying to say?
Re: Not good for Boeing
Posted: Wed Mar 27, 2019 12:25 am
by Clownkicker
He wasn't trying to say ANYTHING, dimwit.
He asked you a question. A simple question with a one-word answer.
And you couldn't answer it. :lol:
Re: Not good for Boeing
Posted: Wed Mar 27, 2019 3:33 am
by namngulfvet
Clownkicker wrote:He wasn't trying to say ANYTHING, dimwit.
He asked you a question. A simple question with a one-word answer.
And you couldn't answer it. :lol:
Why dont you try to get on here sober for once or with out a Dick in your mouth.
Re: Not good for Boeing
Posted: Wed Mar 27, 2019 7:20 am
by johnforbes
On this Boeing thread, Clownslacker tried to wing it.
That is just plane wrong, and it is unknown what propelled him.
Re: Not good for Boeing
Posted: Wed Mar 27, 2019 7:44 am
by Clownkicker
Poor namandgulfdumbfuck. He couldn't argue with what I said so he calls people drunk. :lol:
Tell you what, dumbfuck, why don't you try to get on here with your helmet on to protect your mushy head or without a mouth full of shit you sucked out of an asshole.
Re: Not good for Boeing
Posted: Wed Mar 27, 2019 7:46 am
by Clownkicker
As always, dimwit johnforbes crashes and burns with his tired, unimaginative, pathetic puns.
Re: Not good for Boeing
Posted: Wed Mar 27, 2019 8:47 am
by namngulfvet
Clownkicker wrote:As always, dimwit johnforbes crashes and burns with his tired, unimaginative, pathetic puns.
And again we have Clown posting during work hours. His morning blow job hour for his supervisors must be over
Re: Not good for Boeing
Posted: Wed Mar 27, 2019 10:07 am
by Clownkicker
And again we have namandgulfdumbfuck posting during work hours and criticizing others for doing the same thing.
Well, except he says nothing about johnforbes or RealTool posting during work hours. This is because dumbfuck is nothing more than a partisan hypocrite and sheep. His morning blow job hour for his supervisors must be over.
Put on your helmet, mush head.
Re: Not good for Boeing
Posted: Wed Mar 27, 2019 10:49 am
by namngulfvet
Again "Clown" I dont work. So I can do as I please.. But thanks for admitting you cant read nor comprehend
Re: Not good for Boeing
Posted: Wed Mar 27, 2019 10:56 am
by Clownkicker
Of course you don't work, dimwit. You're a socialist leech, living entirely off the taxpayers.
And I work for myself, so I can do as I please as well, you ignorant fuckhead.
But RealTool DOES work, and he steals from his company and its employees. But you don't care about that, do you. Not a peep out of you concerning him.
Re: Not good for Boeing
Posted: Wed Mar 27, 2019 11:32 am
by namngulfvet
And I work for myself, so I can do as I please as well, you ignorant fuckhead.
No you dont you lying sack of shit. Your a lying scum sucking Union Slung and everyone on this board knows it..
But RealTool DOES work, and he steals from his company and its employees. But you don't care about that, do you. Not a peep out of you concerning him.
I have no Idea who "Realtool" is. and even if I did what he does in "HIS" company is up to him. He owns it. Unlike you who works for the taxpayers as a; fucking thief
Re: Not good for Boeing
Posted: Wed Mar 27, 2019 1:53 pm
by RealJustme
But RealTool DOES work, and he steals from his company and its employees.
Clown you do struggle with the English language. It's my company and my employees, not it's employees. Gee, slow down and think before you push submit. :roll:
Re: Not good for Boeing
Posted: Wed Mar 27, 2019 2:31 pm
by Clownkicker
What is it about conservatism that ossifies someone's brain?
What is the appeal of living in a fantasy land like namandgulfdumbfuck?
His utter contempt for truth and reality is staggering. So he desperately turns to a lying strongman and away from the Constitution.
Re: Not good for Boeing
Posted: Wed Mar 27, 2019 2:43 pm
by RealJustme
Clown are you off your meds?
Re: Not good for Boeing
Posted: Wed Mar 27, 2019 2:44 pm
by namngulfvet
What is it about conservatism that ossifies someone's brain?
What is is about Socialism that rots your brain "Clown".....Me I prefer freedom and the way of the Constitution and the bill of rights. While you prefer a mild version of Communism that robs you of your freedom, your right to choose, the right to pursue happiness, the right to start a business to support your family, the right to go to what ever school you wish, the right to own your own home.. under Socialism you have no rights, you cant own anything it all belongs to the government including you and your family..
And you claim my brain is rotted... ROFLMAO. @ you "Clown"
Re: Not good for Boeing
Posted: Wed Mar 27, 2019 5:16 pm
by Clownkicker
I never claimed your brain was rotted, you lying sack of shit.
But I can see how you might think that since your mother put you in a helmet to protect your mushy head from further damage... ROFLMAO. @ you "namandgulfdumbfuck"
Re: Not good for Boeing
Posted: Wed Mar 27, 2019 5:29 pm
by Clownkicker
"Clown are you off your meds?"-RealTool
Tool, you need to ask dumbfuck that question. He's living in a fantasy world unrelated to reality. There is not a single thing he believes about me that is true. I am not black. I am not in any union. I'm not a communist. I'm not even a socialist. I do not work for the government. Since I am self-employed, dumbfuck's "work hours" have nothing to do with me and I can post whenever I choose.
dumbfuck spends every day here upset by some guy that isn't here, and that hasn't been here for at least six years. Some guy that apparently humiliated him on a regular basis and that now owns him. dumbfuck is fixated on shit and assholes and men giving blowjobs. It's just plain unhealthy.
namandgulfdumbfuck can't refute anything that anyone says but pisses himself no matter WHAT anyone says. He even pisses himself whenever YOU say anything, fer cripes sake. Not one rational argument comes out of his mushy brain.
Congratulations on the clowns who think just as you do, Tool. You and johnforbes really need to question anything that dumbfuck supports, because it certainly has nothing to do with reality.
Re: Not good for Boeing
Posted: Wed Mar 27, 2019 7:06 pm
by RealJustme
Clown calm down dude, it's not good for your health.
Re: Not good for Boeing
Posted: Thu Mar 28, 2019 6:13 am
by namngulfvet
Both "Clown" and Elk are in melt down mode after high explanations of Trump going to prison and it fail big time. Until CNN tells em what to do next they are going to whine and snivel, stomp their feet and act like the little spoiled Socialist Twat Waffles they are.
Re: Not good for Boeing
Posted: Thu Mar 28, 2019 6:14 am
by johnforbes
Clown has confused me.
What is a "pun"?
Re: Not good for Boeing
Posted: Thu Mar 28, 2019 7:53 am
by Clownkicker
johnforbes has clarified things for me.
If he doesn't know what a "pun" is, then he just can't spell.
Re: Not good for Boeing
Posted: Thu Mar 28, 2019 7:59 am
by namngulfvet
Clownkicker wrote:johnforbes has clarified things for me.
If he doesn't know what a "pun" is, then he just can't spell.
"ClownLicker" has clarified thing for me. Hes lost his marbles and gone over the edge.
Re: Not good for Boeing
Posted: Thu Mar 28, 2019 8:00 am
by Clownkicker
^^^^^^ "namandgulfdumbfuck" obviously hasn't got a clue what either of us is talking about. :lol: :lol: :lol: :lol: :lol:
Re: Not good for Boeing
Posted: Thu Mar 28, 2019 8:58 am
by johnforbes
Years ago, there was a popular aerobics video entitled "Puns of Steel," wasn't there?
Re: Not good for Boeing
Posted: Thu Mar 28, 2019 9:00 am
by Clownkicker
I think you mean "Steal Puns w/ johnforbes"
The dimwitted guy couldn't come up with anything original if his life depended on it.
Re: Not good for Boeing
Posted: Thu Mar 28, 2019 11:12 am
by namngulfvet
Clownkicker wrote:I think you mean "Steal Puns w/ johnforbes"
The dimwitted guy couldn't come up with anything original if his life depended on it.
See now your being a hypocrite "Clown"... you said it was ok to put a spin on something and it was not a lie. yet here you are accusing Johnforbes of lying and being a dimwit..
Heres a quote from Forbes "video entitled "Puns of Steel," wasn't there? "
And above is your quote. bottom line is you admit when someone puts a spin on anything its a lie an that person is a dimwit.
Get the point "Clown" Anytime YOU! put a spin on anything, your a dimwit. Gotcha, gotcha
Re: Not good for Boeing
Posted: Thu Mar 28, 2019 11:22 am
by Clownkicker
dumbfuck, stop embarrassing yourself.
That's the conservative mind-- completely out of touch with reality.
Re: Not good for Boeing
Posted: Thu Mar 28, 2019 11:36 am
by namngulfvet
No "Clown" its your brain washed Socialist mind thats out of touch.